3 –way iron tipper suitable for building, it has been designed according to the needs of both large enterprises such as small artisans.
This has been designed to equip the tipper in a complete manner allowing the operator to work in absolute safety conditions, while unloading materials and during routine maintenance operations.
The lifting of the body is operated by means of a mobile pushbutton panel which allows the operator to control the operations from the ground. The tipping pins are designed and mounted in such a way as not to allow incorrect inversions and controlled by a front bar which allows the insertion of only one pin at a time.
The opening of the side walls is simple and safe by means of lever columns. Cylinder and balancer are galvanized. Painting is performed with an anticorrosive treatment of high quality.
||multimayer wood, thickness 18 mm|
||H 400 mm / from top to bottom and from bottom to top|
|Cabine protection with pole
|Two offset side cable-tensioning winches||standard|
|Cable-tensioning hooks under the body
|Cylinder and balancer
|Electro-hydraulic power packwith mobile pushbutton||standard|
|Painting||RAL 7021 con trattamento anticorrosivo|
|Dimensions (mm)||Lengh||Width||Weight Kg|
|from 2600 up to 3200||2100||500,00|